Copyright (c) 2023 FabFilter Software Instruments https://www.fabfilter.com/forum en Latest posts in FabFilter's public support forum info@fabfilter.com Sat, 01 Apr 2023 11:14:27 GMT Sat, 01 Apr 2023 11:14:27 GMT https://www.fabfilter.com/ /static/img/logo-fabfilter.svg 31 88 fabfilter.com https://www.fabfilter.com/forum/topic#comment19912 Sat, 01 Apr 2023 11:14:27 GMT ... I mean continuously change the slope, since sometimes a HP with -12 dB/octave is too less and -18 dB/octave is too much... Cheers https://www.fabfilter.com/forum/topic#comment19911 Sat, 01 Apr 2023 11:10:52 GMT There are sometimes some mixing problems where I wish there would be a high pass or low pass filter with variable slope. E.g. where you could adjust with a knob the steepness of the HP/LP from e.g. 6 dB/octave to 48 dB/octave or so. https://www.fabfilter.com/forum/topic#comment19910 Sat, 01 Apr 2023 08:56:56 GMT This is very important. And the arpeggiator should be controllable via midi: switch on, switch off, select mode. https://www.fabfilter.com/forum/topic#comment0 Sat, 01 Apr 2023 07:31:50 GMT I have a mac studio ultra. UAudio audiosystem. Latest updates on everything. Suddenly Pro Q3 crash logic and is not working at all. I have reinstalled all FAB software. https://www.fabfilter.com/forum/topic#comment0 Fri, 31 Mar 2023 15:36:55 GMT Reaper v6.78 x64 Windows 10, VST3 version of Pro-C2 (and Pro-Q3) only. For Reaper I have a bunch of project and track templates that use the C2 in them in. The FX chain window is docked, and I could always count on it showing the whole plugin. At some point I changed the system scaling to 125% from 100%. After that Pro-Q3 looked bigger, which is fine but it no longer fit, so I changed it back to 100% via left-clicking and getting the menu from the resize GUI element in the bottom ... https://www.fabfilter.com/forum/topic#comment0 Fri, 31 Mar 2023 09:03:31 GMT I've taken over an Adobe Premiere Pro project and trying to make it open successfully without errors. I got these three errors on startup: Video Filter missing: RSMB Audio Filter missing: Pro-Q 3 Audio Filter missing: Pro-MB I installed RSMB and after that there was no error about that the next time I opened the project. However, I also installed the trial versions of Pro-Q 3 and Pro-MB, but Adobe keep giving me errors about those audio filters missing ... https://www.fabfilter.com/forum/topic#comment19909 Fri, 31 Mar 2023 00:21:37 GMT Apologies for the typos. Unfortunately I can't edit them after the fact. Btw the math term for the transfer curve is "non-monotonic". https://www.fabfilter.com/forum/topic#comment19908 Thu, 30 Mar 2023 23:22:23 GMT Download all ok know, thanks https://www.fabfilter.com/forum/topic#comment0 Thu, 30 Mar 2023 19:39:31 GMT Hi, After watching multiple times FabFilters's video on Upward Compression (link below), I'm still very confused about some of the transfer curves when doing upward compression with ratios greater than 2.2:1 and the range set at +30db. As shown in the video, the curves go up, then get a sharp dip around the threshold (the curves suddenly go down), and then go up again. This is referred by Dan Worrall as "over-compression". That means the overall order of loudness is not preserved ... https://www.fabfilter.com/forum/topic#comment19907 Thu, 30 Mar 2023 18:10:31 GMT Thanks