FabFilter Pro-L 2 comes with a selection of excellent factory presets that provide ready-to-go
limiting setups for almost all scenarios and types of audio.
To load a preset, click the preset button. The presets menu will appear with all available
presets. Click a menu item to load that preset. The currently selected preset is highlighted
with check marks.
To explore the presets one by one, click on the little arrow buttons to the left and right
of the main preset button. This will load the previous or next preset in the menu.
The preset button shows the name of the current preset. If you have changed the preset by
adjusting one or more parameters, the name is dimmed to indicate that this is not the original
The Default Setting preset is loaded automatically when FabFilter
Pro-L 2 is started. To change the default settings, simply overwrite this preset by
clicking Options > Save As Default in the presets menu.
To open a preset outside the presets folder, click
Options > Open Other Preset. This might be useful if someone sends you a
preset by email, for example.
If somehow the factory presets are lost or not installed properly, click Options
> Restore Factory Presets in the preset menu to restore them.
MIDI Program Change and Bank Select
Loading a presets can also be done via MIDI, using Bank Select and Program Change messages.
Click Options > Enable MIDI Program Changes in the preset menu to enable or
disable this feature. When enabled, the corresponding bank/program numbers are shown in front of
the preset name (for example: (0/65) My Preset). This means that you can load that
preset by first sending a Bank Select message to select bank 0 and then sending a Program Change
message to select program 65.
Important: All the presets in your preset folder are numbered automatically,
starting with bank 0 and program 0. This way, you are able to access any of the presets via MIDI.
However, this also means that when you add new presets to the menu, bank/program numbers of other
presets might change. Be aware of this when recording program changes in a session! We recommend
to create a dedicated folder in your presets folder for your program changes, and name it with
two leading underscores (e.g. "__Programs") to ensure it's the first folder in your preset collection and the presets in this folder start with bank 0 and program 0.