At the righthand side of the bottom bar in the interface, FabFilter Pro-G contains the bypass,
input level and output level parameters.
You can bypass the entire plug-in with the Global Bypass toggle
button to the left of the input level button. While most hosts already provide the ability to
bypass plug-ins, our internal global bypass feature is guaranteed to correctly compensate the
latency of the plug-in and it also applies soft bypassing to avoid clicks. While the plug-in is
bypassed, the display dims and a red light glows in the bypass button itself.
Input and output levels and pannning
With the input and output level/pan knobs, you can fully adjust the stereo audio
level both before and after of the expansion/gating process.
You can directly adjust the input or output gain by clicking and dragging the button
vertically, so there is no need to click it first to display the knobs. You can also
double-click the buttons to directly enter a value using the keyboard.
When Channel Mode is set to Mid/Side, the pan rings around the level knobs will pan between
mid (only mono) and side (only stereo) instead of between left and right.